Strategy
ORE mining strategies
Updated · 9 min read
An ORE mining strategy answers three questions: how much SOL per round, which tiles, and under what conditions to deploy. Most miners cover all 25 tiles every round. The main upgrades are to skip rounds without a mining edge, or to wait for a large motherlode.
The three decisions
| Decision | What it changes | What it does not change |
|---|---|---|
| Amount per round | How much ORE you earn and how much you spend, in proportion. | Your cost as a percentage of SOL deployed. |
| Tiles | How often you are on the winning tile, and how swingy results are. | The 1 in 25 chance of any tile winning. |
| Conditions | Which rounds you take part in. | What a round costs once you are in it. |
No strategy changes the protocol’s cut: a round you deploy in costs about 10.5% of the SOL you put down when you cover the board evenly. What a strategy can change is how much ORE you get for that cost, by choosing the rounds where your share is larger or the prize is bigger.
The six one-click strategies
These are the setups miners on refinORE run most, offered as one-tap presets. Each is the same request the rule builder would send, with one number to fill in.
1. Every round
Deploy on all 25 tiles every round, no conditions. It is the most-used recipe by a wide margin. You are always on the winning tile, so you collect a share of every round’s ORE and results are as steady as mining gets. The weakness is that it also mines the rounds where the board is crowded and ORE is expensive to produce.
2. Only with an edge
Deploy only when the mining edge is at least a threshold you set; 20% is the most common choice. The autominer checks the edge late in each round and skips when mining would cost more than your threshold allows. A skipped round costs nothing. This is the recommended starting point, because it removes the rounds that are worst for you without asking you to predict anything.
3. Motherlode hunter
Deploy only when the motherlode is at least a size you set, typically 100 ORE. You pay for far fewer rounds, and every round you do pay for carries a meaningful jackpot. It does not raise the 1 in 500 odds of a hit. Expect long idle stretches.
4. Edge + motherlode
Both conditions must hold: the edge is above your threshold and the motherlode is above yours. This is the most selective preset and deploys least often. It suits miners who want to be in only the best rounds and are happy to wait.
5. Hot or cold tiles
Deploy on a smaller set of tiles chosen by recent win history: the hottest or the coldest. Tile history does not predict the next draw (here is why), so treat this as a way to concentrate on fewer tiles rather than an edge. Fewer tiles means a bigger share when you hit and nothing when you miss.
6. Solo hunter
Deploy only on solo tiles, where a single miner takes the whole ORE. The expected ORE is the same as on split tiles for the same share, but it arrives as occasional full-ORE wins instead of a steady trickle.
Side by side
| Strategy | Rounds mined | Variance | Best for |
|---|---|---|---|
| Every round | All | Lowest | Simplicity and steady accumulation |
| Only with an edge | Most, when the board is quiet | Low | A sensible default |
| Motherlode hunter | Few | High | Chasing the jackpot cheaply |
| Edge + motherlode | Fewest | High | Patient, selective mining |
| Hot or cold tiles | All | High | Bigger share on fewer tiles |
| Solo hunter | All | Highest | Full-ORE wins |
Choosing an amount
Your ORE scales with your share of the SOL on the winning tile, so doubling your amount roughly doubles both what you earn and what you spend. The typical refinORE miner deploys between 0.01 and 0.1 SOL per round; the heaviest miners deploy 0.5 SOL or more.
- Below 0.025 SOL per round, refinORE’s minimum fee of 0.00025 SOL is more than 1% of your deployment. Small amounts are fine for learning; they are not the efficient way to mine.
- Your balance needs to cover the deployment plus fees every round. Returned SOL is claimed back automatically to fund the next one.
- Bigger deployments move the board. If you are a large share of a round, your own SOL lowers the edge you see.
Choosing tiles
With all 25 you never miss. With fewer tiles, “best EV” selection puts your SOL on the tiles with the least SOL from other miners at the moment of deployment, where your share is largest. That choice is made late in the round on live data, which is something only an automated miner can do reliably.
Experienced miners often run 20 to 24 tiles, skipping the most crowded ones. It trims cost on the tiles where your share would be smallest, at the price of missing the round when one of the skipped tiles wins.
Beyond presets: custom rules
The rule builder chains IF / ELSE rules, evaluated in order each round. Conditions can use mining edge, motherlode size, total SOL on the board, ORE price, and how crowded solo and split tiles are. Each rule has its own amount and tile recipe. A common pattern:
IF edge ≥ 40% AND motherlode ≥ 150 → deploy 0.2 SOL on 25 tiles IF edge ≥ 20% → deploy 0.05 SOL on 25 tiles ELSE → skip
You can save any setup as a named strategy, share it with a link, or describe it to Roberto AI and have it built for you.
Frequently asked questions
What is the best ORE mining strategy?
Should I mine all 25 tiles?
Does skipping rounds cost anything?
Can I change strategy while mining?
Keep reading
Should you buy ORE or mine it?
How to tell whether mining ORE is cheaper than buying it: the breakeven formula, what mining edge means and a worked example with live-style numbers.
MiningThe ORE motherlode
The motherlode grows 0.2 ORE every round and has a 1 in 500 chance of paying out. How it is won, how big it gets and whether waiting for it pays.
StrategySolo vs split tiles
Each ORE round has 10 solo tiles and 15 split tiles. What changes about your reward, your variance and your odds on each kind.
StrategyHot and cold tiles
Every ORE tile has the same 1 in 25 chance each round. What hot and cold tile strategies really change, and what to look at instead.
This guide is educational and is not financial advice. ORE protocol parameters can change; figures were checked on November 15, 2026 against the ORE program and ore.com. refinORE is not affiliated with ORE.